PCFP4-100G-LR4C 100GBASE-LR4 LAN-WDM 1296~1309nm 10Km CFP4 Optical Transceiver

Features
 Compliant with 100GBASE-LR4
 Support line rates from 103.125 Gbps to 111.81 Gbps
 Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF
 Digital Diagnostics Monitoring Interface
 Duplex LC optical receptacle
 No external reference clock
 Single 3.3 V power supply
 Case operating temperature range:0°C to 70°C
 Power dissipation < 6W

Applications
 Local Area Network (LAN)
 Data Center
 Ethernet switches and router applications

Standard
 Compliant to IEEE 802.3ba
 Compliant to CFP MSA CFP4 Hardware Specification
 Compliant to CFP MSA Management Interface Specification

Description
100G CFP4 LR4 optical Transceiver integrates receiver and transmitter path on one module. In the transmit side, four lanes of serial data streams are recovered, retimed, and passed to four laser drivers. The laser drivers control four EMLs (Electric-absorption Modulated Lasers) with center wavelength of 1296 nm, 1300nm, 1305nm and 1309 nm. The optical signals are multiplexed to a single –mode fiber through an industry standard LC connector. In the receive side, the four lanes of optical data streams are optically de-multiplexed by the integrated optical de-multiplexer. Each data stream is recovered by a PIN photo-detector and trans-impedance amplifier, retimed. This module features a hot-pluggable electrical interface, low power consumption and MDIO management interface.




The module provides an aggregated signaling rate from 103.125 Gbps to 111.81 Gbps. It is compliant with IEEE 802.3 ba 100GBASE-LR4 and ITU-T G.959.1, and OIF CEI-28G-VSR. The MDIO management interface complies with IEEE 802.3 Clause 45 standard. The transceiver complies with CFP MSA CFP4 Hardware Specification, CFP MSA Management Interface Specification, and OIF CEI-28G-VSR standards.